Troubleshooting
Trouble tips
Trouble
Trouble
Outlet water temperature is too high
Outlet water temperature is too low
Inlet water temperature is too high
Inlet water temperature is too low
Seat temperature is too high
Seat temperature is too low
Water flow is too low
Water flow is too high
Operating buttons failure
Water temperature fourth level LED flashes
Third level LED flashes
Water temperature second level LED flashes
First level LED flashes
Water pressure / Third level LED flashes
Seat temperature fourth level LED flashes
Seat temperature first level LED flashes
Water pressure / First level LED flashes
Water pressure / Fourth level LED flashes
Night light flashes
Trouble tips
Please check
Solutions
Cleaning nozzle does not extend
The nozzle does not spray water
Cleansing water pressure is weak
The cleaning water is cold
The seat is cold
The water supply hose bent and
water blocked
The cleaning nozzle blocked
The water filter clogged with foreign
matter
The water temperature set to room
temperature state
The seat temperature set to room
temperature state
Stretch the inlet water supply hose.
Clean the nozzle
Clean the filter
Reset warm water temperature
Reset the seat temperature
Inlet water temperature and outlet
water temperature difference
Anomalies occur, please contact the company's service center or distributor.
●Please do not disassemble, repair and modify this product by
yourself
●Doing so may result in fire, electrical shock or short circuit
.
WARNING
COMPULSORY
Drain the water and cut off power
1.Cut off power, unplug the plug.
2. Close the T-valve to stop the water supply
to the system.
●
Increase indoor temperature
●
Close the valve
●
Drain the water out of the water supply hose.
Close the valve, loosen and disconnect the water supply hose, to drain water
in the following situations.
- When the water may freeze in some winter area
- Long Periods of Disuse
● Poor water quality may cause dermatitis and product damage.
Remove the water supply hose from the valve
and drain the water out of the water supply
hose.
（
If necessary
）
3.Press and hold the putter in the
direction of (arrow 1),
then go in the direction of the
operation itself (arrow 2)
Remove unit horizontally.
Putter
When using the product again, please confirm and test run (page 14).
Winter product maintenance
When the ambient temperature is likely to drop to 32°F (0°C) or lower, prevent damage to the
pipes and hoses due to freezing.
Please take measures to prevent freezing
：
WARNING
This product can expose you to chemicals including lead(Pb)
,
which is known to the
State of California to cause cancer. For more information go to:
www.P65Warnings.ca.gov
USER MANUAL
Homtone
USER MANUAL
Homtone
