User Manual of DS-8104HMI-M(/XX) Series Mobile Net DVR (V1.20.00)
- 16 -
Alarm Output connection:
DS-8104HMI-M(/XX) series mobile DVR is applied closed signal to trigger the alarm output. That means
when alarm output is triggered, the Alarm OUT and GND will be connected status, that means user must
connect alarm device with power supply.
The alarm output connection is as Fig 2.12:
Connection Description
Detailed steps are as below:
1. Pull out the green plug in the device;
2. Loosen the screws in the plug with mini cross screw, insert the signal wire into the corresponding
pinholes;
3. Then insert the green plug into the corresponding socket.
Fig 2.12 Alarm Output Connection
