13
INSTALLING LED LIGHT KIT AND GLASS GLOBE
1. Screw threaded rod of LED light kit assembly to
the the threaded stud on the housing.
Plug the LED light kit to the plug on the housing.
1
EXISTING CONSTRUCTION ASSEMBLY INSTRUCTIONS – ATTIC SPACE NOT ACCESIBLE
7. Install a circular 4 in. duct (not included) and
secure it with duct tape or clamps (neither
included).
Finish ceiling work. Ceiling hole should be aligned
with edge of fan housing (A).
8. With the wiring and duct connected insert the
fan housing into the ceiling hole. Mount the
housing to the joist with three wood screws
through the holes in the side of the fan housing.
9. Plug the fan back into the housing. Fitting the fan
back into the housing, aligning with the duct open-
ing in the housing. Replace the grille mounting
brackets and secure with screws.
9
7
8
