4
· For optimum viewing, mark the top four screws fixing positions on wall in accordance with
the recommend fixing dimensions- see Fig.2.Drill holes with a six drill bit.
· Fix the wall bracket using that the plug and screws provided .
· Carefully lift the heater up ensuring that the top rear ledge of heater engages the wall bracket
(see Fig.2 in circle) and is sitting centrally.
· Gently bring the heater level with the wall.
· Mark the bottom holes position-see Fig.3, remove the heater ensuring that the bottom fixing
bracket is rotated up.
· Drill and fit wall plug.
· Refit the heater to the wall fixing bracket and rotate the bottom fixing bracket down again
，
and use the screw provided to permanently fix the heater in place.
· Unpack the pebbles from the bag and place them along the light unit in the desired position.
· Place the front glass surround over the front of the fire aligning the slots in the brackets at
each side of the glass panel with the lugs on the sides of the fire-see Fig.4. Again two people
will be required for this operation.
DIAGRAM FOR MODEL: EF431SL
