Assembly Instructions 2/6
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Side Frame (D) to Side Frame (F) with Flat Washer, Spring Washer
and Head Cap Bolt, tightening bolt only halfway.
(See Figure 1)
Attach Brackets to Back Rail (I) with Flat Washers, Spring Washers and
Head Cap Bolts.
(See Figure 2)
Attach Front Rails (H) and Back Rails (I) to unit with Flat Washers,
Spring Washers and Head Cap Bolts, tightening bolts only halfway.
Bracket
Flat Washer
Spring Washer
Head Cap Bolt
Figure 2
Figure 1
I
I
H
H
D
F
