Assembly Instructions /
6 6
IMPORTANT
To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly.
STEP 5
Place unit at desired location.
Loosen slightly Head Cap Bolts attaching
Brackets to unit.
Slide Brackets to wall, then retighten
Head Cap Bolts.
Mark wall with pencil through holes in Brackets.
(See Figure 5)
Move unit.
Drill 3/8” holes in wall at marks, then insert
Anchors into the wall holes. (See Figure 6)
Move unit back into place.
Attach unit to wall with Wall Screws
through Brackets. (See Figure 7)
Figure 5
Figure 6
Figure 7
Wall Screw
Bracket
Anchor
3/8” wall hole
Head Cap Bolt
Bracket
Pencil
Anchor
3/8” wall hole
Bracket
Wall Screw
