Page 2
Configuring the Optional Wi-Fi Adapter
If you wish to connect your Zee to your home network using WiFi, you’ll need to purchase and install the optional WiFi
adapter. Follow these instructions to configure the WiFi adapter:
1.
Connect the Wi-Fi adapter to your HomeTroller with the Ethernet cable still attached.
2.
Access the Network Tab of the Setup section. Locate the Wi-Fi Settings section.
3.
Enter the SSID (Wi-Fi network name) of your Wi-Fi. (This is case sensitive)
4.
Choose your encryption type and enter your Wi-Fi password. Keep ‘Use DHCP’ checked.
5.
Go to Tools->System->Shutdown System and shut the system down. Unplug the power and Ethernet cables.
Now reconnect the power and let the system boot.
6.
Using any browser-enabled device, access find.homeseer.com. Your WiFi connected HomeTroller Zee should
now be accessible!
STEP #2
– Setting Up Remote Access
MyHomeSeer Remote (“MyHS”) is a free cloud service that will allow you to access your HomeTroller Zee from
anywhere using a browser-enabled device or our HSTouch mobile app. Follow these instructions to set up MyHS.
Register for MyHS
1.
Navigate to
https://myhs.homeseer.com/Register
2.
Enter account information as shown on right. Check the sticker on the bottom
of your HomeTroller Zee S2 to get your License ID and License Password.
3.
Click the Register Button.
4.
Check your email and click the verification link. Your MyHS account has now
been created and your HomeTroller can be accessed any time at
https://myhs.homeseer.com/
Configuring HSTouch Mobile App with MyHS
HSTouch Android:
1.
Download and install the HSTouch mobile app from the Google Play store.
2.
Launch HSTouch and choose “settings” from the Select Server menu.
3.
Click MyHomeSeer and enter your MyHS username and password.
4.
Launch HSTouch and choose MyHomeSeer when prompted.
HSTouch iOS (Apple):
1.
Download and install the HSTouch mobile app from the Apple App store.
2.
Access Apple Settings and open HSTouch settings.
3.
Enter your MyHS username and password in the MyHomeSeer server settings.
4.
Launch HSTouch and choose MyHomeSeer when prompted.
STEP #3
– Installing Drivers (Plug-ins)
Your HomeSeer system was designed to work with many different home automation technologies. Each technology
requires a specialized hardware interface and software driver (“plug-in”). Your HomeTroller Zee S2 includes a built-in
hardware interface for Z-Wave. Other hardware interfaces must be connected externally. Follow the steps below to
enable the appropriate plug-in(s) for the technologies you wish to work with:
