background image

HE952

For use with HomEntry Garage Door Openers:

HERDO1 

HESDO1 

 

 

 

   

 

HERDO1 

HESDO1

DN UP

P

S

1

2

3

S

P

1

2

3

1

2

3 2

•  ALWAYS keep remote controls out of reach of children. NEVER permit children to operate or play with remote controls.

•  Activate the garage door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to affect door travel.

•  ALWAYS keep the garage door in sight until it is completey closed. NEVER permit anyone to cross the path of a moving garage door.    

To prevent possible SERIOUS INJURY or DEATH from a moving garage door:   

Programming the Remote Control:

    1. Find the “S” (save) button on your opener.

2. Press and hold the button on your remote control that you want to set for use.

3. Press and release the “S” (save) button on your garage door opener. Release the remote button, when the courtesy 

    light on the opener falshes 3 times. The remote is now programmed to the opener.

HERDO1 

HESDO1

DN UP

P

S

1

2

3

S

P

1

2

3

1

2

3 2

NOTE:

 When deactivating any unwanted remote controls, all previous remote controls will be erased. 

Erasing all Remote Controls from the memory:

1. Press and Hold the “S” button on the opener until the courtesy light flashes twice, and continue holding for approx. 8 seconds, 

    until the courtesy light flashes twice again.

2. Release the button, all codes are now erased.

The lithium battery should operate for up to 5 years. 

If the battery is low, the LED on the remote control 

will not flash when the button is pressed.
To replace the battery: 

To prevent possible SERIOUS INJURY or DEATH: 

•  NEVER allow small children near batteries.

 

I f a battery is swallowed, immediately notify a Doctor.

 •

To reduce the risk of fire, explosion or chemical burn

•  Replace ONLY with CR2032 batteries. 

DO NOT recharge, disassemble, heat above 100°C or incinerate. 

 

 •

CR2032

Use a screwdriver

to open the case as

shown

Remove the old battery. 

Dispose of old batteries 

properly.

Insert replacement 

batteries positive side 

up. Replace the 

batteries with only 

CR2032 batteries. 

Replace the cover. 

Remote Control Battery:

Отзывы: