background image

TROUBLE SHOOTING

PROBLEM

POSSIBLE SOLUTION

Platter does not 

rotate

• Check to ensure the turntable is switched on.

• Check the fuse in the mains plug is not blown.

• Check to ensure the drive belt is fitted.

No sound when 

playing record 

on turntable

• Check the input selector is set to PHONO.

• Check the crossfader is in the correct position.

• Check the channel fader is at a reasonable level.  

• Check the master volume is at a reasonable level.

• Check that the mixer is switched on. 

• Ensure that you have connected to an amplifier.

• Ensure that your amplifier volume is at 

  a reasonable level.

No sound from 

line input

• Ensure that you have set the channel input 

  selector to ‘LINE’.

• Ensure that you have connected to the line/audio 

  out sockets on your external equipment.

No sound from 

headphones

• Check the cue level control. 

• Check the cue channel selector is set correctly.

Sound distortion

• Reduce the channel gain level. 

• Check inputs are connected to correct terminals. 

Loud buzzing

• Ensure that the ground cables are connected the 

  GND posts on both the mixer and the turntables

CONTACT DETAILS

We  trust  you  are  completely  satisfied  with  this  product  from  Acoustic 

Solutions Limited, however please feel free to contact us if you experience 

any  difficulties,  or  if  you  would  like  to  express  your  views  regarding  our 

products.

Please write to:

Acoustic Solutions Limited.

Grand Union Buildings

54 High Street

Weedon 

Northampton 

NN7 4QD

United Kingdom

Telephone 0871 230 7747

Calls are charged at 10p per minute. Mobile call costs may vary. Please con-

tact your service provider for details. This helpline is manned from 9:00am 

to  1:00pm  and  2:00pm  to  4:30pm,  Monday  to  Friday.  Calls  cost  10p  per 

minute.  mobile  costs  may  vary,  please  contact  your  network  provider  for 

details.

www.acousticsolutions.co.uk

 

email: [email protected]

Through the process of continuous improvement, Acoustic Solutions Limited 

reserves  the  right  to  change  or  alter  specifications  without  prior  notice. 

E&OE

15

Содержание TT-500M
















Отзывы: