HomeMatic IP Wired HmIPW-WRC6, Инструкция по установке и эксплуатации

Страница: 43 / 51

43
Start-up
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button
(E)
briefly (see figure 7) .
• Wait until teach-in is completed.
• If teaching-in has been successful, the LED
(E)
lights up green. The device is now ready for use.
• If the LED lights up red, please try again.
• After a short time, the newly taught-in device will
appear in the inbox of your software interface.
Newly connected devices and the corresponding chan-
nels are ready for operation and configuration only after
they have been configured in the inbox. You will find fur-
ther information in the Homematic IP Wired Installation
Guide at www.homematic-ip.com.
For operating without an Internet connection,
please select the option “
Teaching-in of
Homematic IP device without Internet
connection
”. Enter the SGTIN and key of the
device into the corresponding fields. You will find
the SGTIN and the key on the supplied sticker.
Keep the sticker in safe place.