56
Start-up
Please ensure that you do not trap your fingers
between the two halves of the adapter!
After clipping onto the valve body, please attach the
adapter using the provided screw and nut.
5.2.3 Support ring
The valves from different manufacturers may have
tolerance fluctuations that make the radiator thermostat
more loosely seated on the valve. In this case, the
provided support ring should be placed into the flange
before mounting the device
(see figure 9)
.
5.3
Adaption run
Once the batteries have been inserted, the motor
reserves. Meanwhile, “InS” and the activity symbol
( ) are displayed
(see figure 10)
.
After the radiator thermostat has been mounted
successfully, an adaption run (AdA) has to be performed
in order to adapt the device to the valve. To do this,
proceed as follows:
• As soon as “AdA” is displayed, press the menu/
boost button
(G)
to start the adaption run
(see
figure 11)
.
Now the actuator performs an adaption run. “AdA” and the
activity symbol ( ) are displayed
(see figure 11)
. During this
Содержание HmIP-eTRV-B
