HomeMatic HmIP-eTRV-B, Инструкция по монтажу и руководство по эксплуатации

Страница: 51 / 75

51
Start-up
5.1.2 Teaching-in to the Access Point (alternative)
If you have already connected the device to
another Homematic IP device, you first have to
restore the factory settings of the device before
you can connect it to the Homematic IP Access
Point or another Central Control Unit CCU2/
CCU3 (see “1 Information about this manual” on
page 44).
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the
operating manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2/CCU3. For detailed information, please
refer to the Homematic IP User Guide, available
for download in the download area of
www.homematic-ip.com.
To integrate the device into your system and to enable
control via the free Homematic IP app, you must teach-in
the device to your Homematic IP Access Point first.
To teach-in the device, please proceed as follows:
• Open the Homematic IP app on your smartphone.