HomeMatic HmIP-eTRV-B, Инструкция по монтажу и руководство по эксплуатации

Страница: 55 / 75

55
Start-up
thermostat head from the valve (3) .
• Threaded connection with set screw: Loosen the
set screw and remove the thermostat head (3) .
After removing the old thermostat dial you can mount the
Homematic IP Radiator Thermostat with the union nut
(A)
to the radiator valve (see figure 7) .
If required, you can use the supplied adapter for Danfoss
RA valves (see “5.1.1 Direct pairing with a Homematic IP
device” on page 49) or the supplied support ring (see
“5.2.3 Support ring” on page 56).
5.2.2 Danfoss RA adapter
The provided adapter is required to attach to Danfoss RA
valves. The RA- Adapter has been manufactured with pre-
tension in order to provide better fit. Use a screwdriver
during installation if necessary and bend the adapter
open slightly in the vicinity of the screw
(see figure 8) .
The Danfoss valve bodies have elongated notches around
their circumference, which also ensure that the adapter is
properly seated when it snaps on.
During installation, please ensure that the pins
inside the adapter are lined up with the notches
on the valve. Ensure that a suitable adapter for the
valve is properly clipped on.