HomeMatic HmIP-ASIR, Инструкция по монтажу и руководство по эксплуатации

Страница: 31 / 44

31
Mounting
• Remove the mounting plate (F) by rotating the
device and the mounting plate into opposite
directions
(see figure 2+3) .
• Position the mounting plate on the desired site
and mark two bore holes
(G)
with a pen to the
wall or ceiling (see figure 4) .
• Use an appropriate drill to make the holes as
illustrated.
• Use the screws and plugs supplied to fasten the
alarm siren.
5.2 Mounting on flush-mounted boxes
You can mount the alarm siren on flush-mounting/instal-
lation boxes using the holes
(H)
(see figure 4) .
If the device is mounted to a flush-mounting box,
there may be no open conductor ends.
If changes or works have to be made on the
house installation (e.g. extension, bypass of
switch- or socket inserts) or the low-voltage
distribution for mounting or installing the device,
the following safety instruction must be
considered:
Please note!
Only to be installed by persons with the relevant
electro-technical knowledge and experience!*