38
Start-up
5.3
Installation
When selecting the installation location, check
for electrical wires and power supply cables.
You easily can mount the alarm siren to the wall using the
supplied screws and plugs. To do this, please proceed as
follows:
• Choose a site for installation.
In the outdoor area, the mounting location should
be supplied with sufficient daylight and, if possi-
ble, high on a wall of the house so that the alarm
siren can for example not be reached by a burglar.
• Press down the lug at the bottom of the mount-
ing plate (if necessary with a screwdriver) and re-
move the mounting plate
(see figure 2).
• Press the mounting plate to the desired position
on the wall. Make sure that the mounting plate is
right way around (lug at the bottom side).
• Mark the two bore hole in a distance of
75 mm
(see figure 6
).
You can use the supplied drilling template to mark
the holes.
Содержание HmIP-ASIR-O
Страница 3: ...1 A C B D F G E ...
Страница 4: ...2 3 H I ...
Страница 5: ...4 5 G D 6 160 cm 75 cm ...
Страница 6: ...4x 4x 7 4 s 4 s 8 ...
