60
Restore factory settings
8 Restore factory settings
When the factory settings of the device are
restored, all settings will be deleted.
•
Press and hold the teach-in button
(F)
on the mo-
tion detector for at least 4 seconds. The device
LED
(C)
starts to slowly flash red.
•
To reset the device, now press and hold the
teach-in button for at least another four seconds.
The LED will now start to flash red faster.
•
Release the teach-in button to complete the reset
procedure; the LED briefly lights up red, green
and orange in sequence to confirm that the reset
has been successful.
Possible error messages:
This error can only occur if you have connected
the motion detector to a Homematic Central
Control Unit.
If the device LED
does not start to flash once the
button has been held down for 5 seconds but lights
up continuously instead, this means the hand-held
transmitter cannot be reset as it is taught-in to the
Homematic Central Control Unit.
In this case, the motion detector has been blocked
for manual resetting. To restore the factory settings,
Содержание HM-Sen-MDIR-O-3
Страница 11: ...11 Montage ...