49
If the sensor is already taught for a center and
therefore is blocked for direct training, it can
still be put in teach mode as described above
but no teaching occurs and the device LED is
illuminated in red for two seconds.
7.2.2 Teaching in to a Homematic CCU
Your device can be conveniently
•
controlled and configured,
•
connected directly to other devices or
•
used in central control programs
via the Homematic software „WebUI“. Therefore, your
shutter contact has to be taught-in to the Homematic
Central Control Unit first. New devices are taught-in to
the Central Control Unit via the Homematic „WebUI“.
A soon as a component has been taught-in to a
Central Control Unit, it can only be connected to
other components via the CCU.
Each component can only be taught-in to one
Central Control Unit.
Содержание HM-Sec-SC-2
Страница 59: ...59...
