44
•
Insert the two provided LR44 button cell batteries
into the battery compartment with proper polarity
according to the polarity markings. The batteries
are held in the battery compartment by the tensi-
on on the battery caused by the contacts.
•
Note the flashing device LED when the batteries
are inserted (see section "Behavior after inserting
the batteries").
•
Replace the electronics unit on the fastening
holder again.
7.1.2 Changing batteries
Caution! Danger of explosion if battery is
replaced improperly.
Used batteries are not to be disposed of
with the house-hold waste! Please
dispose them at your local battery
collection point!
If there is no reaction from the device that you want
to control when sending or if the flash-code for
empty batteries is shown, the used batteries are to be
replaced with two new button cells of type LR44 as
described in the previous chapter. Make sure that the
batteries are inserted with proper polarity.
Содержание HM-Sec-SC-2
Страница 59: ...59...
