47
Start-up
Instructions for disposal:
Used batteries should not be disposed
of with regular domestic waste! Instead,
take them to your local battery disposal
point.
6.1.3 Behaviour after replacing batteries
Once the battery has been inserted, the wireless
remote control will first perform a self-test/restart (ap
-
prox. 2 seconds). The LED will flash red, orange and
green briefly (LED test display). Initialisation will then
be carried out.
If the battery voltage is low, the button query will
still be activated and the wireless remote control
made ready for operation, provided that the vol-
tage value permits it. Depending on the particu-
lar load, it may be possible to send transmissi-
ons again repeatedly, once the battery has
been allowed a brief recovery period. If you are
using weak batteries, the device may perform a
restart automatically when you press a button.
The device LED will then briefly flash red, green
and orange, and follow this with 5 brief red
flashes to indicate that the battery is weak.
