56
57
General information about radio operation
Technical specifications
Clean the product using a soft, lint-free cloth that is
clean and dry. You may dampen the cloth a little with
lukewarm water in order to remove more stubborn
marks. Do not use any detergents containing solvents,
as they could corrode the plastic housing and label.
13 General information about radio
operation
Radio transmission is performed on a non-exclusive
transmission path, which means that there is a possi-
bility of interference occurring. Interference can also
be caused by switching operations, electrical motors or
defective electrical devices.
The range of transmission within buildings can
differ greatly from that available in the open air.
Besides the transmitting power and the
reception characteristics of the receiver,
environmental factors such as humidity in the
vicinity have an important role to play, as do
on-site structural/screening conditions.
eQ-3 AG hereby declares that this device complies
with the essential requirements and other relevant
regulations of Directive 1999/5/EC.You can find the full
declaration of conformity at www.homematic.com.
14
Technical specifications
Device short description: HM-LC-Sw2-FM-2
Supply voltage:
230 V/50 Hz
Current consumption:
5 A max.
Standby power consumption: 0.5 W
Degree of protection:
IP20
Protection class:
II
Ambient temperature:
5 to 35 °C
Dimensions (W x H x D): 53 x 53 x 30 mm
Weight:
48 g
Radio frequency:
868.3 MHz
Receiver category:
SRD category 2
Typ. open area RF range: 200 m
Duty cycle:
< 1 % per h
Max. switching capacity:
1150 W (total of both
channels)
Kind of load:
ohmic load
Relay:
2x shutter contact