32
Start-up
by using the HomeMatic software "WebUI". Therefore, your switch actua-
tor has to be taught-in to the HomeMatic Central Control Unit first. New
devices are taught-in to the Central Control Unit via the HomeMatic
„WebUI“.
As soon as a device has been taught-in to a Central Control
Unit, it can only be connected to other components via this unit.
Each device can only be taught-in to one Central Control Unit.
During teach-in, please make sure you maintain a distance of at
least 50 cm between the HomeMatic devices and the Central
Control Unit.
To teach-in your device to the Central Control Unit, proceed as follows:
•
Open the "WebUI" user interface in your browser. Click the
"Teach-in devices" button on the right-hand side of the screen.
•
To activate teach-in mode, click "Start teach-in mode" in the
next window.
