26
Hazard information
Do not connect devices into the HomeMatic Switch Actuator
which could cause fire or other types of damage in unattended
operation (e.g. irons).
Remove the plug of the connected device from the HomeMatic
Switch Actuator, whenever you make changes or modifications
to the device (e.g. replacing light bulbs).
Always lay cables in such a way that they do not become a risk
to people and domestic animals.
The device has not been designed to support safety disconnec-
tion. The load is not isolated from the mains.
Before cleaning the device, unplug it from the socket outlet. Use
a dry linen cloth to clean the device. If the device is particularly
dirty, you can slightly dampen the cloth to clean it. Do not use
any detergents containing solvents for cleaning purposes. Make
sure that no moisture will ingress into the housing.
Using the device for any purpose other than that described in
this operating manual does not fall within the scope of intended
use and shall invalidate any warranty or liability. This also
applies to any conversion or modification work. The device is
intended for private use only.
Do not connect multiple plug adapters into one another.
Devices with electronic power supply units (e.g. TV or high
voltage LED light sources) are no ohmic loads. They can
generate inrush currents with more than 100 A. Switching such
kind of loads may lead to premature wear of the actuator.
