Homematic IP HmIP-DRBLI4, Инструкция по установке и эксплуатации

Страница: 50 / 61

50
Operation
phone.
• Select the menu item “Teach-in device” .
• After power supply is established, the teach-in
mode will be active for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button
(A)
briefly (see figure 9) .
• Your device will automatically appear in the
Homematic IP app.
• To confirm, enter the last four digits of the device
number (SGTIN) in your app or scan the QR code.
Therefore, see the sticker supplied or attached to
the device.
• Wait until the connection is completed.
• If connecting was successful, the LED
(A) lights
up green. The device is now ready for use.
• If the LED lights up red, please try again.
• Select the desired solution for your device.
• In the app, give the device a name and allocate
it to a room.
6 Operation
Via the following push-buttons, simple operating
functions are available directly on the device:
• System button (A)