GB
| 6
GB
| 7
• The patient should remain still while the reading is being taken.
• Infrared forehead temperature readings are equivalent to oral temperature readings.
In all of these cases, please consult your doctor.
• Readings taken while asleep should not be compared directly to readings taken while
awake, as body temperature while asleep is typically lower.
• Do not take body temperature readings within 30 minutes of being outdoors,
exercising or bathing.
MEASURING HUMAN TEMPERATURE
1. Press the Power button to turn the thermometer on. The unit will
run a self-test and all symbols on the display will momentarily
appear.
2. Ensure that the thermometer is in Human mode; the Human symbol
will be on the display. To alternate between modes press and
release the Human/Object Mode button until you see the desired
measurement symbol on the display.
3. Press and hold the “Scan & measure button”, aiming the
Measurement Sensor at the person’s forehead,
holding the thermometer approximately 0.5~3
cm. But don’t touch the forehead.
4. Release the “Scan & measure button”. In about
a second, you will hear a short beep means this
temperature reading has been completed and accompany with a back-light.
5. If the temperature measurement is below 38°C, a “Smiling Face” will be
appear next to the reading. If the reading is 38°C or above, a “Frowning Face”
will be displayed and the RED LED light up.
Fever Alarm - Only in Human Mode and Human/Night Mode
6. After about 30 seconds after use, the thermometer will automatically beep and
shut off.
0.5~3 cm
0.5~3 cm
0.5~3 cm
0.5~3 cm
Содержание NO TOUCH
Страница 127: ......