5
PRODUCT FEATURES:
INSTRUCTIONS FOR USE:
• This pillow is for use in the bath and is fully water submersible.
• Place the pillow behind your back and adjust headrest to desired position.
• Use included suction cups by attaching the hooks to the loops on the back of the pillow.
• Affix suction cups to bath to keep pillow in place during bath.
• Massager may be activated by pressing the On/Off button located on the corner of the pillow.
To turn off the unit, simply press the On/Off switch once again.
INSERTING THE BATTERIES
1. Open zipper located along back side of pillow.
2. Remove battery case and twist to align arrow on top of case with arrow on bottom of case.
Pull two halves apart. Follow the correct polarity as shown in the battery compartment.
3. Place four ”AA” size batteries into battery compartment, replace two halves with arrows aligned and push
together. Twist to secure.
4. Place the battery case back in pillow and close zipper.
NOTE: Incorrect installation of batteries may cause damage to the unit.
On/Off Button
Suction caps (supplied)
clip onto rear of cusion to
secure to bath prior to use
Convenient battery operation
IB-BA110MYGB-0111-01:Layout 1 25/01/2011 13:58 Page 5
