Kneading Massage
Shiatsu is a deep kneading circular massage. This unit features
a massage mechanism that travels up and down the back of
the cushion.
NOTE: The moving
massage mechanism
always “parks”
or finishes in its
lowest position. It
will continue to this
position after the
power has been
turned off. If the
electrical supply is
interrupted, when
power is restored,
the mechanism will
“park” or move to its
lowest position.
Mode Button
Choose from 3 preset programs where the massage travels up and
down in a specific area of the back, either Full Back, Upper Back or
Lower Back. To select a program, simply press the Mode button and
the L.E.D. will illuminate the active program. Continue to press the
Mode button until the desired program is selected.
NOTE: There is an approximate 15-minute auto
shut off on the unit for your safety.
Heat Button
For soothing heat when
massage is on, simply
press the heat button
and the corresponding
red L.E.D. light will
illuminate. To deselect,
press the button again
and the corresponding
L.E.D. light will turn off.
For your safety, heat
cannot be turned
on if massage is not
selected.
Power Button
To turn on the massage
functions, first press
the POWER button.
The L.E.D. indicator will
illuminate and confirm
your selection. To turn off
the massage functions,
simply press the button
again. The L.E.D. indicator
will blink while the Shiatsu
massage mechanism
returns to its lowest point
and then it will turn off.
8
9
Kneading Shiatsu
Massage Cushion
with Heat
NOTE: When
“POWER” button
is pressed for first-
time use, the moving
shiatsu mechanism
will automatically
move to the lowest
position before
starting a massage
program. After initial
use, mechanism
will always park at
lowest position. See
note below regarding
parking.
