Shiatsu Massaging Cushion
Moving Massage Mechanism
NOTE: The moving
shiatsu massage
mechanism always
“parks” or finishes in
its lowest position.
It will continue to
this position after
the power has been
turned off. If the
electrical supply is
interrupted, when
power is restored,
the mechanism will
“park” or move to its
lowest position.
NOTE: There is a 15-minute auto shut off
on the unit for your safety.
Power Button
To turn on the massage
functions, first press
the POWER button.
The L.E.D. indicator will
illuminate and confirm
your selection. To
turn off the massage
functions, simply press
the button again. The
L.E.D. indicator will
blink while the shiatsu
massage mechanism
returns to its lowest
point and then it will
turn off.
Moving Shiatsu
massage mechanism
6
7
CON
Heat Button
For soothing heat when
massage is on, simply
press the heat button
and the corresponding
red L.E.D. light will
illuminate. To deselect,
press the button again
and the corresponding
L.E.D. light will turn off.
For your safety, heat
cannot be turned
on if massage is not
selected.
Shiatsu Massage
Shiatsu is a deep kneading circular massage.
This unit features a massage mechanism that
travels up and down the back of the cushion.
Shiatsu Massage Mode Button
Mode button causes the moving Shiatsu
massage mechanism to target specific areas
of the back:
Full Back (F)
The Shiatsu massage mechanism travels up
and down the back.
Upper Back (U)
The Shiatsu massage mechanism focuses
from the mid to upper back.
Lower Back (L)
The Shiatsu mechanism focuses from the mid
to lower back.
Zone Toggle
To select the “Full Back” program, press the
“Mode” button once. The LED indicating the
letter “F” will illuminate. To select “Upper
Back” press the “Mode” button a second time
and the “U” LED will illuminate, indicating the
Upper Back program. To select “Lower Back”
press the “Mode” button a third time and the
“L” LED will illuminate indicating the Lower
Back mode is active. To return to “Full Back”
press the “Mode” button a fourth time.
