HoMedics DUO LUX, Инструкция по эксплуатации

Страница: 2 / 48

1
2
3 4
5
6
Shave the hair in the area you wish to treat (to 1mm or less) then clean and dry the skin.
Connect the power lead to the device and plug into the mains. All the LED lights on the device will
flash and go off except the green status light which will stay illuminated.
Press the power button to activate the device. The green status light will flash and the device will
default to the lowest power level (level 1 = one blue light).
Hold the device against your skin in the area to be treated, ensuring the treatment window is in full
contact with the skin. The green light will stop flashing to indicate good contact is made and the power
level will automatically adjust to suit your skin tone.
If you have sensitive skin you may need to reduce the power to a lower setting. We strongly
recommend a patch test to assess this before you carry out a full treatment (see page 6 of the
instructon manual).
To adjust the power level manually, press the power button until the desired level
is indicated.
For power levels 1, 2 & 3 – GLIDE MODE
Hold the flash button down and glide the device slowly across the skin as it delivers a series of flashes.
For power levels 4 and 5 – STAMP MODE
Press the flash button once then move the device to the next patch of skin before pressing again. One
flash will be delivered with each press.
1
2
3
4
5
6
GB
I
2
QUICK START GUIDE
1
2
3
4
5
6
QUICK START GUIDE
IB-IPLHH390EU-0618-01.qxp_Layout 1 29/06/2018 09:15 Page 2