15
E
CONNECT WITH THE SUPPLIED AC/DC POWER ADAPTER
Plug the DC plug of the power supply into the socket
on the side of Circulation Pro. (See Fig 8) Plug in the
power adapter to a suitable wall socket. (Make sure
that the input voltage of the wall socket is suitable for
the supplied adapter).
INSTALLING BATTERIES FOR MAIN UNIT
If you want to use the Circulation Pro with battery power instead of the supplied power adapter, the battery
compartment is located on the underside of the unit.
Remove the battery cover from the unit by removing the screw with a screwdriver. Insert 4 1.5V size AA
batteries with the + and -marks correctly aligned.
INSTALLING BATTERIES FOR REMOTE CONTROL
Remove the battery cover from the unit by removing the screw with the screwdriver provided. Insert 2 1.5V
size AAA batteries with the + and -marks correctly aligned.
The transmitter of the remote control is at the top in the colour black (Fig. 10).
When using the remote control, please remember to point the transmitter to the
receiver of the main unit, which is located between the gel pad jack of the main unit.
(Fig. 11).
Note on batteries:
Do not mix different types of batteries or an old battery with a new one. To prevent the risk of leakage or
explosions, never recharge the batteries, apply heat or take them apart.
When not using batteries, remove them to prevent battery drain. If liquid leaks from the batteries, throw them
away. Thoroughly clean the battery compartment with a dry cloth.
Fig. 8
Fig. 8
Fig. 9
Fig. 10
Fig. 11
13-0095 CB200-CA_IM_E_vE.qxd:Layout 1 7/2/13 2:05 PM Page 15
