13
E
HOW TO OPERATE
For Foot – SOLE
1. Place your bare feet onto Circulation P ro (do not wear socks).
2. Press the on/off button, the LCD screen will light up in Orange. The
program shows AUTO and both Bands show 00, which is in standby
mode (see Fig. 1).
3. Gently increase intensity setting by pushing the button “SOLE +”. Or
decrease intensity setting by pushing the button “SOLE -”. The intensity
level is adjustable between 0 and 99. The LCD display will show the
selected level (see Fig. 2).
4. You can adjust the auto off timer by pressing the “Time –“ or “Time +”.
Timer ranges from 1-60 minutes. The timer will begin to count down
from the time you selected (see Fig. 3). To terminate the massage period,
user can turn off the unit anytime by pressing the on/off Button once.
5. If you are satisfied with the current massage program, you can lock the
current massage program by pressing the Auto/Mode key. The rest of the
massage time will then only run the selected massage program
(see Fig. 4).
IMPORTANT INFORMATION:
a. The aim is not to get up to level ‘99’.
b Chose an itensity level that is comfortable for you! This level may very
from day to day.
c. Remember to drink plenty of fluids – if you are dehyrdated, this will
reduce the effectiveness of the device
Fig. 1
Fig. 2
Fig. 3
Fig. 4
13-0095 CB200-CA_IM_E_vE.qxd:Layout 1 7/2/13 2:05 PM Page 13
