14
APPLYING THE CUFF
1. Remove all watches, wrist jewelry, etc. prior
to attaching the wrist monitor. Clothing
sleeves should be rolled up and the cuff
should be wrapped around bare skin
for correct measurements.
2. Apply cuff to left wrist with palm facing
up as shown in Fig. A.
3. Make sure the edge of the cuff is about
1/4”~1/2” (1 cm) from the palm as
shown in Fig. B.
4. In order to ensure accurate
measurements, fasten the hook and
loop strap securely around your wrist so
there is no extra space between the cuff
and the wrist. If the cuff is not wrapped
tight enough, the measurement values
will not be accurate.
5. If your physician has diagnosed you
with poor circulation in your left wrist,
place the cuff around your right wrist as
shown in Fig. C.
Note:
If it is not possible to use the cuff on your
left wrist, it can also be used on your right wrist. However,
all measurements should be made using the same wrist.
The device is not supposed to be used when your wrist is
wounded or injured.
Fig. A
Fig. B
Fig. C
15-0150 BPW-710-CA_IM_v3--03.indd 14
2015/10/29 下午3:43
