5. Position cuff edge 1.5-2.5 cm (0.6-1.0 inches)
above elbow.
6. Center tube over middle of arm.
7. Pull the end of the cuff so that it tightens evenly
around your arm. Press the hook and loop material
together to secure. Allow room for 2 fingers to fit
between the cuff and your arm.
8. Lay your arm on a table (palm upward) so the
cuff is at the same height as your heart.
Make sure the tube is not kinked.
15
A
R
R
O
W
M
U
S
T
FA
LL
W
IT
H
IN
Y
E
LL
O
W
B
A
N
D
D-ring
End of cuff
Felt Material on the
outside of cuff
2. Plug the cuff tube into the left side of the unit.
Cen
ter
tube
ove
r
mid
dle
ofa
rm
.
Insert plug here
3. Open the arm cuff so that your arm may be placed through it.
4. Remove tight fitting clothing from around your upper left arm.
1. If the cuff is not assembled, pass the end of the cuff furthest away from the
tubing through the metal D-ring in order to form a loop. The smooth side
without the felt material should be on the inside of the cuff loop.
14
