5. When the measurement is completed, the cuff will
deflate entirely. Systolic pressure, diastolic pressure
and pulse will be shown simultaneously on the LCD
screen.
The measurement is then automatically
stored into memory.
Note:
1. This monitor automatically turns off approximately
1
minute
after last operation. You may also press the
START/STOP button
to turn the unit off.
2. To interrupt the measurement, you may press the
START/STOP (recommended)
,
“M,”
“Language,”
“Talking Mode,” User- Select
or
Date & Time Set
(
) buttons. The cuff will deflate immediately after
a button is pressed.
22
2. With the cuff wrapped around your arm, press the
START/STOP button
. Do not inflate the cuff unless it is
wrapped around your arm. All digits will light up to check
the display functions. The checking procedure will be
completed after about 3 seconds.
/
M
START
STOP
Note:
If using the Voice Assist
®
“Instructions On” mode,
you will be prompted to press the START/STOP
button again before measurement begins.
3.
After all symbols disappear, the display will show
“00”. The monitor is
“Ready to Measure”
and will
automatically
inflate the cuff to start measurement.
4. The cuff will begin deflating as measurement continues.
Note:
This monitor will re-inflate automatically if the
system detects that your body requires more
pressure for measurement.
21
