HoMedics AR-NC01, Инструкция по эксплуатации

Страница: 8 / 16

14 15
Troubleshooting
The unit won't
turn on • The unit is not
plugged in • Plug the unit in
• The filters are dirty • Clean or replace the
nano-coil filter and/
or clean the pre-filter
• The front or rear grill is
blocked by foreign objects
• Remove any obstacles
or check the pre-filter
and clean if needed
• Nano-coil filter is
incorrectly installed or
out of place • Properly install the
nano-coil filter
• Replace the
nano-coil filter
• The plastic bag is still on
the VOC/Odor filter • Remove the plastic bag
• Rear cover is not
completely attached • Make sure rear grill is
completely engaged
• The unit has been running
for over 2,000 hours
• Remote control battery
has run down • Replace the battery
No air flow or
noticeable
cleaning effect
Problem Possible Cause Solution
Clean Filter Indicator
This air cleaner is equipped with a CLEAN FILTER indicator to let you know when it
is time to clean the Nano-Coil filter, about every 732 hours of use. When the Nano-
Coil filter is ready to be cleaned, the CLEAN FILTER indicator will light up on the
control panel.
Once the Nano-Coil filter has been cleaned, press and hold the CLEAN FILTER button
until it beeps to reset the filter indicator.
We recommend replacing your VOC filter, if you choose to use it, when you replace
your Nano-Coil filter (about every 18 months, with regular maintenance).
To purchase a Nano-Coil replacement filter, model # AR-NCFL1, go back to the retailer
(where you purchased your air cleaner) or visit www.homedics.com. Replacement
VOC filter, model # PP-ARNC01VOC, can also be purchased
at www.homedics.com.
8. Place the tabs at the bottom of the
grill plate into the base of the unit.
See Fig. 19
9. Hold engaged bottom of the grill
plate in place and push the top of the
grill plate back toward the unit until
the release tabs at the top of the grill
click back into place. See Fig. 20
Fig. 19
Fig. 20
TABS TABS
Cleaning and Maintenance
We recommend that the air cleaner be cleaned at least once a month and before storage.
1. Turn the air cleaner OFF and unplug it from the outlet
2. Use a dry cloth to clean the external surfaces of the air cleaner
3. The grill plate may be cleaned with a damp cloth or the brush attachment of
your vacuum cleaner.
DO NOT USE WATER, WAX, POLISH, OR ANY CHEMICAL SOLUTION