4. Attach Back Frame to Base
Figure 7A/7B/8
• Flip chair back into the regular position.
• Slide the Back of the chair into the frame, matching
the corresponding numbers.
Figure 9
• From the back side add washer and screw on all bolts
to secure the Back to the Chair Base.
• Completely tighten all nuts and bolts on the entire chair.
6
7
Figure 7A
Figure 7B
Figure 8
Figure 9
Figure 10
Figure 11
5. Final Steps
Figure 10
• Firmly insert the connector from the bottom of the back cushion
to the connector on the seat cushion as shown in Figure 10.
Figure 11
• Install Wood Plugs into each of the Bolt Holes.
• Remove number stickers from chair frame.
