5
G
B
INSTRUCTIONS FOR USE:
IMPORTANT - Preparing the appliance for use
The Shiatsu Massager comes with a screw located on the back of the unit to protect the massage mechanism
during shipment, which must be removed before the first use to allow the shiatsu feature to function. Use the
provided Allen key. Then, properly dispose of the screw.
WARNING – Failure to remove screw may cause permanent damage to the appliance.
Strapping System
The Foldable 3D Shiatsu and Vibration Massaging Cushion incorporates a unique strapping system which
allows you to fasten it to almost any chair. Just slip the straps over the seat or chair and adjust fastening straps
to secure. Your massager won’t slip or slide away.
Carry Bag Instructions
Make sure the cushion is unplugged and the
cord is properly secured in the pocket between
the cushion and seat. With cushion sitting
upright in the chair, remove the bag from the
compartment on the cushion (see Fig. A). Unzip
the bag and slide it over the cushion from the
top down (see Fig. B). Zip the bag and carry the
cushion by the handles on the side of the bag
(see Fig. C).
Back flap
This massage cushion incorporates a removable back flap in suede finish fabric to add comfort to the
massage experience – this is used to soften the massage if too intense.The flap is easily removed as secured
by hook and eye fastening. To clean back flap only simply follow the wash instructions:
Note: Do not use this product for more than 20 mins at a time.
Fig. A
Fig. B
Fig. C
Moving Shiatsu
massage mechanism
The actual product materials and fabrics may
vary from the picture shown.
IB-SBM480PFEU-0212-02_Layout 1 17/02/2012 12:24 Page 5
