7
ELECTRICAL CONNECTIONS
Receiver
Ceiling
Mounting
Bracket
White (neutral)
Green or Bare
Copper (ground)
White (“AC IN N”)
Outlet Box
Black (hot)
Receiver Head
Black (“AC IN L”)
White (neutral)
Green (ground)
White (neutral)
Black (motor)
Red (for L)
Receiver
Red (for L)
Gray
(for N)
Gray (for N)
Black (
“
to motor L
”
)
GREY
Ensure there are no loose wires or connections,
and secure connectors with electrical tape.
Step 1:
Insert the receiver into the tray with the
receiver facing the ceiling. For best performance,
make sure the white antenna on the end of the
receiver remains extended and not tangled with
any of the electrical wires.
Step 2:
Connect the 4 colored wires from the
remote receiver to the 4 identically colored lead
wires from the fan motor. Secure each set with
the provided wire nuts.
Step 3:
Connect the 2 colored wires from
the remote receiver to the 2 identically colored
lead wires from the outlet box. Secure each set
with the provided wire nuts.
Step 4:
Connect the green or bare copper ground
wire from the outlet box to the ground wires from
the ceiling mounting bracket and the ceiling fan.
Separate the white and green connections from
the black wire connections, which should be kept
on opposite sides of the outlet box.
Again, ensure that the power has been
cut before working with the wiring. Use
the wire nuts provided with your fan.