manualshive.com logo in svg

HOMEDEPOT Merra CFN-1032, Руководство пользователя, Страница: 7 / 11

Поделиться
Скачать
HOMEDEPOT Merra CFN-1032 Скачать руководство пользователя страница 7

6

DOWNROD MOUNTING

Pin

Downrod

Clip

×2

Set  Screw

×2

Hitch Pin

Retaining 

Clip

Downrod

Canopy

Canopy Cover

Coupling Cover

Downrod

Canopy

Canopy Cover

Coupling Cover

Slot

Step 1: 

Remove the pin 

and clip from the downrod. 

Then partially loosen the 

two steel screws in the 

yoke at the top of the 

motor assembly.

Step 2: 

Carefully place the 

canopy, canopy cover, and 

coupling cover onto the 

downrod. Feed the lead 

wires from the fan motor 

through the downrod.

Step 3:

 Install the downrod 

onto the yoke, aligning the 

holes, inserting the pin 

through the downrod, and 

reinstalling the clip. Then 

tighten the steel screws.

Step 4:

 Place the downrod's mount into the bracket on 

the outlet box. Rotate the entire assembly until the tab 

has dropped into the mount's slot and locked firmly into 

place. The motor assembly should no longer rotate if 

seated properly.

Failure to reattach the hitch pin and/or properly seat the 

downrod can cause  the  fan  to fall from the ceiling 

during  operation.  

DO  NOT  

use the fan  before  ensuring  it  is  properly  

secured and the motor can no longer rotate.

Содержание Merra CFN-1032












Отзывы:

Нет отзывов