5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Installation
To test your power supply cord:
1. Plug power supply cord into a grounded 3-prong outlet.
2. Press RESET (2) (on some devices, a green light will turn on).
3. Press TEST (1) and listen for click. The RESET button will trip and on some devices, a green light will turn off.
4. Press and release RESET (2) and listen for click. The RESET button will latch, and on some devices, a green light will turn on. The
power supply cord is ready for operation.
NOTE:
The RESET button must be pushed in for proper operation.
□
The power supply cord must be replaced if it fails to trip when the test button is pressed or fails to reset.
□
Do not use the power supply cord as an off/on switch. The power supply cord is designed as a protective device.
□
A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer and must not be
repaired.
□
The power supply cord contains no user serviceable parts. Opening the tamper-resistant case voids all warranty and performance claims.
PLANNING INSTALLATION
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here
TOOLS REQUIRED
Phillips
screwdriver
Tape
measure
Scissors
Pencil
Cordless drill
1/8 in. bit
Level