14
Operation (continued)
4
Thermostat
□
The thermostat is used to set the desired room temperature
when the unit is being operated in the COOL MODE.
□
To set the desired room temperature, rotate the thermostat
switch to the desired setting. After the set temperature is
achieved the thermostat will automatically start and stop the
compressor in order to maintain the desired set temperature.
□
Rotate the thermostat selector clockwise for higher cool
settings.
□
Higher cool settings will provide lower room temperature.
Rotate the thermostat selector counterclockwise for lower
cool settings. Lower cool settings will provide higher room
temperature.
NOTE:
The controls featured in this manual are
representative of many available models. Your model may
offer slightly different features.
5
Changing Air Direction
□
Use the Vertical Level Vane (A) to direct the air right or left.
Use the whole cartridge (B) to direct air up, down or straight
ahead.
B
A
6
Normal Sounds
When your air conditioner is operating normally, you may hear sounds such as:
□
Droplets of water hitting the condenser, causing a pinging or clicking sound. The water droplets help cool the condenser.
□
Air movement from the fan.
□
Clicks from the thermostat cycle.
□
Vibrations or noise due to poor wall or window construction.
□
A high-pitched hum or pulsating noise caused by the modern high-efficiency compressor cycling on and off.