HOMEBIOGAS HBG 2.0, Руководство пользователя

Страница: 14 / 48

14
Improper installation of inlet pipe & combined outlet in the HomeBiogas system can damage the digester’s inner liner, causing a leaking digester tank
when filled with water. Follow the steps below to properly insert the pipes, to prevent damage and ensure a functioning system.
Check that there is a protective cardboard layer between the
pipe connector openings and the digester’s inner lining. contact
Homebiogas support if this cardboard protector is missing.
i. ii. Lubricate the pipes, align and inser t each pipe firmly with the digest er on a flat,
hard surface. The cardboard protectors will prevent damage to the inner liner.
iii. Combined Outlet Pipe: Hold onto the rim of the pipe connector with
both hands, use the thumbs to push the outlet pipe in all the way.
LUBRICANT
Inlet pipe: Hold onto the folds of the digester fabric around the pipe, support the mouth of
the pipe against your body, and push the pipe all the way into the connector. Take care not
to push the pipe against the inner liner!