axis Adjustment
0°~90°
Adjusting Nut
0°~360°
0°~360°
• Loosen the adjusting nut.
• Adjust the pan direction [0° to 360°].
• Adjust the tilt direction [0° to 90°].
• Rotate the camera [0° to 360°] to adjust
the lens to the surveillance angle.
• Tighten the adjusting nut to complete
the installation.
4. Adjust the surveillance angle.
2. Route the corresponding cables.
3. Secure the camera to the wall with the supplied screws.
Secure the Camera to the Wall
Step 5: Installation
Ceiling Mounting
Hole
Hole
Hole
Mounting
Step 4: Before mounting your device
Both wall mounting and ceiling mounting are suitable for the Camera. Wall mounting will be taken as
an example in this section. If you decide to go with the ceiling mounting as your method of installation,
then you can use the wall mounting steps as a reference.
1. Drill the screw holes into the wall according to the drill template.
1. Before mounting your camera, see if it is within Security Shuttle's range by taking the Camera to the
place where you want it to be mounted and plug it in.
2.Wait until you see live streaming video from the Home8 app before mounting.