Step 1: Unpack your devices and accessories
1. Unpack your devices and accessories.
2. Pair the Camera with Security Shuttle within 1-10 feet to make sure the connection is working well.
1
2
4
3
5
6
7
9
8
10
11
Power supply interface
Ethernet interface
* Ethernet cable is not included.
Step 2: Power on the Camera and connect it to the system
microSD Card Slot
WPS/RESET
Network data
Electrical Power
Wireless
Router
1. Insert the microSD* card into the Camera Card Slot before
powering up the Camera, if you want to have continuous
video recording.
NOTE - microSD Card not included. You can proceed to
section Step 2.2 Power on the Camera and Connect.
You can also purchase a microSD Card at a later time and
insert this by following Step 2.1 to enable the continuous
video recording feature.
*
Option 1: Wireless
Connect the included power adapter to the
Camera’s power supply interface.
2. Power on the Camera and connect it to the system.
There are two methods for powering and connecting.
Please review the two options and decide which
option you would like to use: