PRE-INSTALLATION (Continued)
INSTALLATION
Step 1. Installing the Mounting Bracket
-
Line up the holes on the Mounting Bracket ( E ) with the holes on your junction box. Using
the two Mounting Screws ( F or G ) attach to junction box.
Step 2. Installing the mounting plate
- Take the junction box wires through the hole in the mounting plate (D).
- Place the mounting plate (D) against the junction box.
When mounting to a wall, the “UP” arrow must point upward.
When mounting to an eave, the “UP” arrow must point toward the building.
!
Tools Required for Installation (not included)
WARNING: Risk of electric shock. Disconnect power at fuse or circuit breaker
before installing or servicing.
!
CAUTION: Do not cut any wires with factory installed wire connectors or
remove the wire connectors
A Light Fixture
1
B
Small mounting bolt
1
C
Decorative Cover
1
D
Mounting Plate
1
E
Mounting Bracket
1
F
Junction Box Screw
2
G
Junction Box Screw
2
H
Large mounting bolt (pre-installed)
1
User Manual
1
Part
Description Quantity
FIXTURE PACKING LIST
H
B
C
D
E
F
G
C
H
A
D
E
F or G
F or G
B
E
E
D
E
B
Silicone
Sealant
04
05
