Stainless Steel Solar Motion Sensor (2-Pack)
(888) 782-5618
1.
Use a damp cloth to clean the solar panel
2.
To avoid any damage to this light, please do not use any chemical or abrasive cleaner
HOW TO OPERATE AND INSTALL
HOW IT WORKS
CLEANING AND MAINTENANCE
Model No. ELJ7040V
Figure 1
This product contains (1) 3.7V 1000mAH Ni-MH rechargeable battery. When the
battery expires, it must be recycled or disposed of properly. Please contact your
local waste disposal authority for correct procedure. Do not put battery into fire.
Do not attempt to replace the battery
RECHARGEABLE BATTERY
• Press the button to "ON" by inserting the Press Pin into the hole near the motion
sensor
Note: Lights with solar panel may have a protective film over the solar panel. This
must be removed prior to use.
Figure 2
• Choose desired wall location. Drill two holes on the wall (use the two mounting
holes as template for the screw locations as shown in Figure 2). Insert the plastic
anchors and screw the solar unit with the two screws into the wall tightly
s e c u r i t y
www.homezonesecurity.com
Solar panel collects sunlight to charge
the battery (included) during the day
Turns on high brightness when motion
is detected in range
Turns off high brightness to low dim
light when motion is no longer detected
last 30 seconds
5m
5m
