Home Theater Master MX-600, Руководство пользователя

Страница: 4 / 80

3
Thank you for purchasing the MX-600 RF/IR remote control. You
can use the MX-600 line of sight with your components via IR
(infrared) and/or with the companion MRF-100 base station. The
base station will enable you to place your audio/video components
out of sight behind closed doors and/or in another room of your
house. The MX-600 sends RF (radio frequency) signals to the
MRF-100 throughout your house (50-100 feet, indoors or
outdoors).
The MRF-100 converts your commands to the infrared signals that
control your A/V components.
1.The MX-600 remote control sends
radio waves in every direction, so
you don't have to point the remote
anymore!
2.The MRF-100's built-in Front Blaster sends commands to
components in the same cabinet space as the MRF-100.
3. Self-adhesive “Flashers” affix to the Infrared sensors on the
front panels of your components. The Flashers relay commands to
components out of sight of the MRF-100’s Front Blaster. The
flashers plug in to the MRF-100’s rear flasher line outputs via their
10 foot cables.
Note:
Components with original RF remote controls cannot be operated by
the MX-600 unless the component can be switched to Infrared control
via it's internal menus.The MX-600
’
s RF signal only communicates
with the MRF-100 base station (which converts it to Infrared signals).
1. Introduction