36
The appliance is not running.
• The appliance is not plugged in.
• The appliance is not turned on.
• The voltage of the installation is not correct.
• The circuit breaker or fuse may have blown.
The appliance is not cold enough.
• Check the temperature control setting.
• Check if the ambient temperature is beyond the
appliance’s operating temperature.
• The door is open too frequently.
• The door is not closed correctly.
• The door is not sealing correctly.
• There is insufficient free space around the
appliance.
The compressor starts and stops frequently.
• The external temperature is high.
• A large number of bottles are stored in the cellar.
• The door is open too frequently.
• The door is not closed correctly.
• The appliance has not been correctly set.
LED lights do not operate.
• The appliance is not plugged in.
• The fuse has blown.
• LED lights are broken.
• The light switch is off.
The device emits vibrations.
• The appliance is not leveled.
The appliance makes too much noise.
• The rattling noise may come from the flow of
refrigerant, which is normal.
• Water can be heard circulating at the end of a
cooling cycle.
• Expansion and contraction of the internal walls
may cause a cracking sound.
• The appliance is not leveled.
• Check if the fan is in good condition.
The door does not close properly.
• The appliance is not leveled.
• The door seal is dirty or damaged.
• The shelves are not positioned correctly.
• A part of the contents is preventing the door from
closing.
TROUBLESHOOTING
You can solve many common problems quickly, saving you the cost of a possible service call. Try the suggestions
below before calling the service technician.
