7
HomewerksWW.com
NEW CONSTRUCTION INSTALLATION INSTRUCTIONS (continued)
5. Secure the suspension bracket (C) to fan housing using
screw (CC) (included). Secure suspension brackets (D, E)
with screws (BB) (included).
5
6. Remove junction box cover as shown in illustration number 6.
Using quick connect ports, connect house wires to the switch
and fan. Please refer to the wiring diagram on page 5 to ensure
proper wire connections are being made.
Note: Do not use metal wall plate with the switch, as it may
cause interference with the fan operation.
ATTENTION:
The switch included with this ventilation fan
requires a neutral wire connection. If a neutral line is not
present, one must be run by a qualified electrician.
If you require assistance, please call 1-877-319-3757 before
attempting switch installation.
NOTE:
This switch is intended to only operate independently
with this bath fan. Connections to other electrical fixtures are
prohibited and could cause electrical issues.
6
7. Connect a 4 in. circular duct and vent to the outside. Secure
it with duct tape or clamp.
Turn on power source.
7
8. Join the connectors for the BLUETOOTH
®
speaker.
8
