ENGLISH
15
OPERATING INSTRUCTIONS
Intended use
• This device is suitable for juicing fruit and vegetables only. Any other use may result in damage to the device
or injuries.
Unpacking and checking
• Carefully take the device and its accessories out of the packaging. Retain the packaging in case you would
like to store the device away or transport it at a later date. If you choose to dispose of the packaging, then
please do so according to the applicable legal regulations.
• Check the packaging contents for completeness and damages. Should the contents in the packaging not be
complete or be damaged, do not use the device. Return it to your retail outlet immediately.
Device assembly
• Clean the device and all accessories before the first use. Refer to the chapter
CLEANING AND CARE
.
• Set the motor unit (7) on a flat, stable and slip-resistant surface. Press the motor unit when setting up
slightly onto the surface so the suction feet below the device find a good hold.
• Put the strainer base (4) onto the motor unit (7) so that the spout (5) points slightly to the left. Turn the
strainer base to the right until it locks into the guide rail. (Fig. 1)
• Connect the strainer with grater (3) to the motor screw (6). Make sure that the strainer is securely connected
to the motor screw to prevent damage during operation of the device.
• Put the cover (2) on the strainer base (4) so that the sealing device of the cover is on the left of the strainer
base closure device. Turn the cover counter-clockwise until it locks into the guide rail (Fig. 2).
• Position the collection cup (11) on the designated cover holder (2) and slide it until it stops (Fig. 3).
•
Note:
Putting a small trash bag into the collection cup (11) simplifies subsequent cleaning.
• Put the juice container (10) under the spout (5).
Fig. 1
Fig. 2
Fig. 3
ES5002E-IM-DE-EN-V1.indb 15
17/11/2009 1:28 PM
