ITEM # ACNS18V BRAD NAILER/STAPLER
3
BATTERY TOOL USE, CHARGING AND CARE
a)
Recharge only with the charger and the battery packs included with this product.
b)
Ensure the switch is in the off position before inserting battery pack.
c)
Do not open the battery.
Danger of short-circuiting.
d)
Protect the battery against heat, e.g., also against continuous sun irradiation and fire.
There is danger of explosion.
e)
Do not short-circuit the battery
. There is danger of explosion.
f)
Battery leakage (liquid ejection).
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, flush
them with clean water for at least 10 minutes, then seek immediate medical attention. Liquid
ejected from the battery may cause irritation or burns.
g)
Care when charging.
Make sure cord for the charger is located so that it will not be stepped
on, tripped over, or otherwise subjected to damage or stress. Do not operate charging system
with damaged cord or plug.
h)
Battery recycling and disposing.
All batteries must be recycled or disposed of properly (see
section on Environment).
INTENDED USE
The tool is intended for tacking of cardboard, insulating material, fabric, foils, leather and similar
materials on surfaces of wood or materials similar to wood. The machine is not suitable for the
attachment of wall.
LED FUNCTION INDICATOR:
